Here are the wheel fitment basics Nissan gives for the R34 GT-R, and the factory wheel sizes by chassis.
Fitment basics
- PCD: 5x114.3
- Centre bore: 66 mm (Nissan's figure for the R34 GT-R)
Factory wheel sizes
- R32 GT-R: 16-inch, with 225/50R16 tyres
- R33 GT-R: 17-inch, with 245/45ZR17 tyres
- R34 GT-R: 18x9 +30, with 245/40ZR18 tyres
Before you buy wheels
Check width, offset and brake clearance for your exact car, especially if you have Brembos or bigger brakes. Fit the same tyre size on all four corners and keep wear even.
Superforma hubcentric wheel spacers | Superforma hubcentric PCD adapters | Superforma PCD measuring gauge | GT-R parts interchange | Skyline GT-R brake upgrade guide
FAQ
What is the Skyline GT-R wheel PCD?
Nissan gives 5x114.3 and a 66 mm centre bore for the R34 GT-R. Check your own car's wheels before you order.
What size are the factory GT-R wheels?
R32 16-inch with 225/50R16 tyres, R33 17-inch with 245/45ZR17 tyres, and R34 18x9 +30 with 245/40ZR18 tyres.
Will my wheels clear Brembo calipers?
It depends on the wheel. Check clearance with your own wheels before you buy.